POST DETAILS :
Fertilisers and Chemicals Travancore Limited (FACT) has released a notification for the post of FACT Recruitment 2026. Interested candidates must fulfill all the eligibility criteria and apply online. Before applying online, candidates are advised to carefully read the full notification, recruitment eligibility, age limit, post-wise eligibility, selection procedure, syllabus, admit card, answer key, and all other relevant details. Read the official advertisement thoroughly before submitting the application.
OVERVIEW AND DATE :
Fertilisers and Chemicals Travancore Limited (FACT)
FACT Recruitment 2026
Notification No. 01/2026
IMPORTANT DATES
| Event | Date |
|---|---|
| Date of Recruitment Notification | 07/05/2026 |
| Last Date for Submission of Online Form | 21-05-2026 (4:00 PM) |
| Last Date for Physical Application (by Speed Post/Registered Post) to reach FACT | 28-05-2026 |
| Age & Experience Eligibility Calculated As On | 01-05-2026 |
| Skill Test / Interview Date | To be notified on FACT website www.fact.co.in |
FEES DETAILS
- Read Notification
AGE DETAILS :
Age Limit
| Post Category | Post Codes | Maximum Age (as on 01.05.2026) | Date of Birth Range |
|---|---|---|---|
| Draughtsman / Engineer / Deputy Manager | 1 to 5 and 7 to 20 | 35 Years | Born between 01.05.1991 and 30.04.2008 |
| Senior Draughtsman / Senior Manager | 6 and 21 to 27 | 45 Years | Born between 01.05.1981 and 30.04.2008 |
| Assistant General Manager | 28 to 34 | 50 Years | Born between 01.05.1976 and 30.04.2008 |
POST DETAILS, ELIGIBILITY and QUALIFICATION:
| Post Code | Post Name | Minimum Qualification | Experience Required |
|---|---|---|---|
| 1 | Draughtsman (Chemical) | Diploma in Chemical Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in Design & Drafting of PFDs, P&IDs & Process Specifications in Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia project drawings using AutoCAD. |
| 2 | Draughtsman (Mechanical-Piping) | Diploma in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in Design & Drafting of piping drawings using AutoCAD for projects in Oil & Gas/Fertiliser/Chemical industries; experience in preparation of layouts, Key plans, Isometric drawings, bill of quantities etc. (Knowledge in 3D modeling using Cardworx plant software is desirable). |
| 3 | Draughtsman (Electrical) | Diploma in Electrical/Electrical and Electronics Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in preparation of single line diagram, General arrangement drawings of substation buildings, power layout, earthing layout, lighting layout etc. using CAD software and preparation of BOQ for erection tenders. |
| 4 | Draughtsman (Instrumentation) | Diploma in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in preparation of engineering drawings using CAD software and preparation of BOQ for erection tenders. |
| 5 | Draughtsman (Civil) | Diploma in Civil Engineering/Architecture | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in preparation of Civil general arrangement/Structural drawings of RCC or Steel Structures using CAD software. |
| 6 | Sr. Draughtsman (Civil) | Diploma in Civil Engineering/Architecture | (a) 8 / (b) 10 years experience in preparation of Civil general arrangement/Structural drawings of RCC or Steel Structures using CAD software. |
| 7 | Engineer Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 1 / (b) 2 / (c) 3 years experience in Process Design and Detailing Engineering involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands on experience in process simulation and/or design software will be an added advantage. |
| 8 | Engineer (Design Piping) | Degree in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 years experience in developing piping layouts, equipment layouts, piping isometrics, material take-offs (MTO), and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD preferred. |
| 9 | Engineer (Design-Mechanical) | Degree in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 years experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors etc. Proficient in finalization of Procurement specifications, tender documents, BOQ and review of vendor documents/drawings. |
| 10 | Engineer Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 years experience in an engineering consultancy firm in designing EHV/HV power distribution system, sizing calculations, earthing system, lightning protection, lighting, BOQ for erection contract, procurement specifications, vendor drawing review. Basic knowledge in drawing SLD, power and earthing layout in AutoCAD required. |
| 11 | Engineer Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 years experience in an engineering consultancy or EPC firm in design of instrumentation systems including field instruments, control system, automation projects; BOQ for erection contract, procurement specifications and vendor drawing review. |
| 12 | Engineer Design (Civil) | Degree in Civil Engineering | (a) 1 / (b) 2 / (c) 3 years experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 13 | Engineer Estimation (Civil) | Degree in Civil Engineering | (a) 1 / (b) 2 / (c) 3 years experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 14 | Deputy Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | Minimum 5 years experience in Process Design and Detailing Engineering involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands on experience in process simulation and/or design software will be an added advantage. |
| 15 | Deputy Manager (Design Piping) | Degree in Mechanical Engineering | Minimum 5 years experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD preferred. |
| 16 | Deputy Manager (Design-Mechanical) PCE | Degree in Mechanical Engineering | Minimum 5 years experience in design consultancy or EPC environment in design of static equipment such as Pressure Vessels, Storage Tanks, Heat Exchangers. Experience in ASME Sec VIII, API 650/620, TEMA codes is desirable. Proficiency in PV Elite, AME Tank and related tools required. |
| 17 | Deputy Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | Minimum 5 years experience in an engineering consultancy firm in designing EHV/HV power distribution system, sizing calculations, earthing system, lightning protection, lighting, BOQ, procurement specifications, vendor drawing review. Basic knowledge in drawing SLD, power and earthing layout in AutoCAD required. |
| 18 | Deputy Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | Minimum 5 years experience in an engineering consultancy or EPC firm in design of instrumentation systems including field instruments, control system, automation projects; BOQ, procurement specifications and vendor drawing review. |
| 19 | Deputy Manager Design (Civil) | Degree in Civil Engineering | Minimum 5 years experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 20 | Deputy Manager Estimation (Civil) | Degree in Civil Engineering | Minimum 5 years experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 21 | Senior Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 8 / (b) 10 years experience in Process Design and Detailing Engineering involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands on experience in process simulation and/or design software will be an added advantage. |
| 22 | Senior Manager (Design Piping) | Degree in Mechanical Engineering | (a) 8 / (b) 10 years experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD preferred. |
| 23 | Senior Manager (Design-Mechanical) | Degree in Mechanical Engineering | (a) 8 / (b) 10 years experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors etc. Proficient in finalization of Procurement specifications, tender documents, BOQ and review of vendor documents/drawings. |
| 24 | Senior Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 8 / (b) 10 years experience in an engineering consultancy firm in designing EHV/HV power distribution system, sizing calculations, earthing system, lightning protection, lighting, BOQ, procurement specifications, vendor drawing review. Basic knowledge in drawing SLD, power and earthing layout in AutoCAD required. |
| 25 | Senior Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 8 / (b) 10 years experience in an engineering consultancy or EPC firm in design of instrumentation systems including field instruments, control system, automation projects; BOQ, procurement specifications and vendor drawing review. |
| 26 | Senior Manager Design (Civil) | Degree in Civil Engineering | (a) 8 / (b) 10 years experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 27 | Senior Manager Estimation (Civil) | Degree in Civil Engineering | (a) 8 / (b) 10 years experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 28 | Assistant General Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 12 / (b) 15 years experience in Process Design and Detailing Engineering involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands on experience in process simulation and/or design software will be an added advantage. |
| 29 | Assistant General Manager (Design Piping) | Degree in Mechanical Engineering | (a) 12 / (b) 15 years experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD preferred. |
| 30 | Assistant General Manager (Design-Mechanical) | Degree in Mechanical Engineering | (a) 12 / (b) 15 years experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors etc. Proficient in finalization of Procurement specifications, tender documents, BOQ and review of vendor documents/drawings. |
| 31 | Assistant General Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 12 / (b) 15 years experience in an engineering consultancy or EPC firm in designing EHV/HV power distribution system, sizing calculations, earthing system, lightning protection, lighting, BOQ approvals, procurement specifications, vendor drawing review. |
| 32 | Assistant General Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 12 / (b) 15 years experience in an engineering consultancy or EPC firm in design of instrumentation systems including field instruments, control system, automation projects; BOQ, procurement specifications and vendor drawing review. |
| 33 | Assistant General Manager Design (Civil) | Degree in Civil Engineering | (a) 12 / (b) 15 years experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 34 | Assistant General Manager Estimation (Civil) | Degree in Civil Engineering | (a) 12 / (b) 15 years experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
VACANCY DETAILS : Total Post 34
Salary :
| Post / Experience Level | Consolidated Pay (Rs.) | Maximum Consolidated Pay (Rs.) |
|---|---|---|
| Draughtsman (1 year experience) | 25,750 | 32,660 |
| Draughtsman (2 year experience) | 26,530 | 33,640 |
| Draughtsman (3 year experience) | 27,330 | 34,650 |
| Draughtsman (5 year experience) | 29,000 | 36,770 |
| Senior Draughtsman (8 year experience) | 31,700 | 40,200 |
| Senior Draughtsman (10 year experience) | 34,650 | 42,660 |
| Engineer Design in all discipline/Estimation (Civil) (1 year experience) | 35,520 | 44,400 |
| Engineer Design in all discipline/Estimation (Civil) (2 year experience) | 36,590 | 45,740 |
| Engineer Design in all discipline/Estimation (Civil) (3 year experience) | 37,690 | 47,120 |
| Deputy Manager Design in all discipline/Estimation (Civil) (5 year experience) | 40,000 | 50,000 |
| Senior Manager Design in all discipline/Estimation (Civil) (8 year experience) | 43,720 | 54,650 |
| Senior Manager Design in all discipline/Estimation (Civil) (10 year experience) | 46,400 | 57,980 |
| Assistant General Manager Design in all discipline/Estimation (Civil) (12 year experience) | 49,240 | 61,520 |
| Assistant General Manager Design in all discipline/Estimation (Civil) (15 year experience) | 53,820 | 67,240 |
Selection Process :
| Post Codes | Mode of Selection | Details |
|---|---|---|
| 1 to 6 (Draughtsman / Senior Draughtsman) | Skill Test in Engineering Drafting Software | Candidates successful in the practical/skill test will be assessed and ranked on basis of marks scored. Tie-breaking criteria (in order): (a) Completed years of relevant experience; (b) Earlier year of passing the relevant qualification (Diploma certificate); (c) Earlier date of birth. |
| 7 to 34 (Engineer / Deputy Manager / Senior Manager / AGM) | Interview | Selection will be based on marks scored in the Interview. |
HOW TO APPLY
- Candidates must complete a two-step application process. Step 1: Submit Online Form and upload Application Form (in prescribed format available on website along with notification – printed, manually filled, signed, photo affixed and uploaded in PDF format) on or before 4:00 PM on 21.05.2026 via the Online Registration link at www.fact.co.in >> Careers >> Job Openings >> Recruitment Notification 01/2026. Step 2: Send the original Application Form uploaded along with all relevant certificates/documents by Speed Post/Registered Post so as to reach FACT on or before 28.05.2026.
- Candidates wishing to apply for more than one post must submit separate online applications and send separate applications with connected documents to the HR Department for each post. Envelope containing the application shall be superscribed with “Application for the post of (___) – Ad.01/2026.” Application received by post without submitting Online Form, or Online Form submitted without uploading prescribed Application Form, or not receiving Application by post, or Application received late, will not be considered.
- Send by Speed Post/Registered Post to: DGM (HR), HR Department, FEDO Building, FACT, Udyogamandal, PIN – 683501 so as to reach on or before 28.05.2026.
IMPORTANT LINK :-
इच्छुक उम्मीदवार अधिक जानकारी के लिए पूर्ण Notification पढ़ सकते हैं |
IF You Satisfied By SARKARIJOB.NET(Website) Please Like & Share More People (Thanks).
IMPORTANT LINKS
- Application Form: Click here
- Apply Online: Click here
- Official Notification PDF: Click here
- Official Website: Click here
FACT Recruitment Apply Online | FACT Recruitment Official Website | FACT Recruitment Direct Link | FACT Recruitment Selection Process | FACT Recruitment eligibility criteria | FACT Recruitment notification PDF
FAQs :
How many post codes are notified under FACT FEDO Engineering Recruitment 2026?
A total of 34 pos
What are the important dates for FACT FEDO Engineering Contract Recruitment 2026
The recruitment notification is dated 07 May 2026, the last date for online form submission is 21 May 2026 up to 4:00 PM
Bank Jobs
Andhra Pradesh